Do I Need an EQ Pedal for My Guitar?


eq_pedal

Do you feel like your guitar isn’t as good as it used to be?

Is the sound a little too sharp or a little too dull?

If so, then maybe you need an eq pedal for your guitar. An eq pedal is a device that plugs into the input of an amplifier and alters its tone by changing the frequency response.

In this article, I’ll discuss how it works and whether or not you need one on your guitar!

So without further ado, let’s just get straight into it, shall we?

Why you would need an EQ Pedal for your guitar

Why do you need a separate EQ pedal if your amp has equalization controls and your pedals do?

A standalone EQ pedal allows you to influence your sound in a way that many pedals or amps simply can’t.

An EQ pedal allows you to fine hone what you want to sound like and more control in your hands has to be better.

An EQ pedal gives you the power to cut or boost a certain frequency range that may be important in your sound.

This can give you more of what you want and less of what you don’t, giving your guitar an overall better tone!

Where should an EQ pedal go in chain?

If you want to push and color the sound, place an equalizer (EQ) in front of distortion or gain-based effects.

EQing after distortion gives you volume fluctuations that allow you to go from a softer lead sound to a louder one.

You can also place an EQ in front of a compressor.

Compression is the process that makes your playing dynamics more even, which means you’ll play quieter and louder on average without any changes to the volume.

However, compression benefits from having some equalization put before it because otherwise, your tone will be overly compressed (smaller range between loud and quiet).

Is an EQ pedal worth it for beginners?

It’s a no-brainer to invest in an EQ pedal if you want to improve the quality of your sound.

EQ pedals are extremely valuable, as they allow you to adjust various guitar or bass tones, shape your amplifier’s tone, and use it as a booster.

It’s easy to say that any guitarist who wants to have more control over his/her sound should definitely invest in an EQ pedal.

If you’re a beginner, you might want to use the EQ on your amp at first.

You’ll find that a lot of amps have great-sounding eq sections, and if they don’t quite sound good enough for you, then it’s time to invest in an EQ pedal!

When learning to EQ a guitar amp, start by gradually adjusting each control until you discover the sweet spot.

When it comes to EQing your amplifier, focus on each control for a while.

Don’t just dive into changing every knob at once; choose one and adjust it little by little until you’re satisfied with your guitar sound.

Should you compress before EQ?

When applied to a track, compression adds thickness and texture. The sound of each position, EQ pre (before) or EQ post (after) compression is distinct in terms of tonality, tone quality, and color.

Typically, the use of EQ before your compressor creates a warmer, rounder sound while the use of EQ after your compressor results in a brighter, crisper sound.

If you’re looking for a warmer and thicker tone when compressing your signal, put EQ before compression.

On the other hand, if you want to add more brightness and create an attack in your tone, use EQ after compression instead!

There’s no right or wrong answer here; it comes down to your personal taste and what tool you’d like to use.

If you’re not sure, try both ways and decide for yourself which one sounds better!

How do you EQ fuzz?

When it comes to fuzz, you can’t just use any equalizer because the sound might get too high-pitched and shrill.

However, if you want a bright tone that cuts through with lots of clarity, an EQ is perfect for getting your guitar sounding brighter!

Most people who play lead on their guitars prefer solid-state amps whereas players who prefer rhythm tend to go for tube amps.

The reason why is because solid-state amps are generally brighter, while most tubes give you a warmer tone.

By using EQ pedals on your solos and riffs (boosting certain frequencies), it will make the sound more cutting through all of that noise!

If you want an EQ pedal that’s specifically designed for lead guitar, check out the Six Band EQ.

For example, if you want to boost your mid-range frequencies (around 300 Hz), put this in-between distortion pedals and your amplifier.

If you’re looking for a sound with more lows or highs, go ahead and adjust your tone as you wish.

How do I EQ my bass?

It’s common for beginners to automatically put an overdrive or fuzz pedal before their amplifier, but that will give your sound a very narrow range of frequencies and make it too bassy!

You need to use EQ pedals for the guitar so that the lows and highs can be adjusted separately.

The key to EQing your bass is being able to adjust the range of frequencies that you want, which means getting a nice clean tone before adding any distortion or overdrive!

Whether you’re playing with an amp or just plugging into a direct box, use an EQ pedal for guitar so that you can shape your sound how you like it.

If you use an overdrive pedal before your bass, that’s usually all the EQing you need to do because distortion pedals also give low-end frequencies depending on their settings.

What’s the best way to use an EQ?

Using your amplifier’s built-in equalizer can be a great place to start when it comes to shaping your tone, but if you want more control and specific frequencies then consider using EQ pedals for guitar.

You’ll find many people who swear by the power of their amp’s EQ and others who prefer an additional boost pedal, but there’s also plenty of people that love both.

Doing this is a great way to introduce some variation into your tone while still having access to all the frequencies you need!

 

Read Also: My Gear Recommendations

Recent Posts